Kinco Fd5 Series Servo AC Driving Equipment High Performance Support, Power Inverter 220V Fd425/435/625 AC Electric Motor Servo Drive

Basic Info

Model NO.	FD425/435/625-PA/PF-000
Condition	New
Customized	Customized
Material	Metal
Power	Automatic Control Protection Monitoring Measuremen
Feedback Signal	Ingle-Turn Communication Magnetoelectric Encoder
Feedback- Signal	Photoelectric Single-Turn Encoder
Feedback-/Signal	Photoelectric Multi-Turn Encoder
Control Method	Position/Speed/Torque Contro
Communication Interface	RS485 / Profinet
Power Supply Voltage	AC220V 3.9A or AC380V 7A
Protection Class	IP20
Digital Input and Output	7 in/5 out
Protection Function	Over Voltage, Under Voltage, Over Short Circuit
Certificate	CE Certification/IEC61800-5-1
Transport Package	Cartons Usually
Specification	CE
Trademark	kinco
Origin	China
HS Code	8401200000
Production Capacity	>100, 000 PCS/Year

Product Description

FD5 series servo drive parameter table






Model		FD5 series
		FD425-PA-000	FD425-PF-000	FD435-PA-000	FD465-PA-000
Power	Power supply	1PH 200-240VAC(fluctuate10%) 50/60Hz(fluctuate 3Hz)		1PH 3PH 200-240VAC(fluctuate10%) 50/60Hz(fluctuate 3Hz)	3PH 380-415VAC(fluctuate10%) 50/60Hz(fluctuate 3Hz)
	Logic power supply	---------		200-240VAC(fluctuate10%)50/60Hz(fluctuate 3Hz),0.5A
Current	MAX continuous output current(rms)	2A(200W/3.1A(400W)/3.9a(750W)	5A	10A	7A
	Peak current (PEAK)	7A(200W/314A(400W)/18a(750W)	18AP	27.5AP	25AP
Feedback signal		Magnetic single-turn absolute encoder,Single-turn photoelectric encoder,Multi-turn type photoelectric absolute encoder
Dynamic braking		FD425 drive has no built-in braking resistor, FD435 built-in 100Ω, limited power 20W; FD465 built-in 300Ω, limited power20W;When the actual power exceeds the limit power, an external braking resistor is required (depending on conditions, mainly used in the occasion ofrapid start and stop).
Absorption point for dynamic braking		DC380V±5V	DC380V±5V	DC380V±5V	DC680V±5V
Overvoltage alarm		DC400V±5V	DC400V±5V	DC400V±5V	DC710V±5V
Undervoltage alarm		DC200V±5V	DC200V±5V	DC200V±5V	DC400V±5V
Cooling method		Air cooling	Fan cooling	Fan cooling	Fan cooling
	Weight(KG)	0.881		1.5
Positioncontrolmode	Order control method	External pulse input control; 8-segment position can be controlled using DIN signal; Internal paramater of communication setting control
	Order smoothing method	Low-pass filte(r Set by internal prameter),S-curve smooth filter(Set by internal parameters in mode 1)
	Pulse order method	Pulse+Direction,CCW+CW,A phase+B phase(3.0-30V ,Maximum 500 KHz)
	Maximum input pulse frequency	Differential transmission mode:up too 4MHz,Open collector transmission mode:500 KHz
	Electronic gear ratio	Setting range: Gear factor:-32767 ,Gear divider:1!32767 ,1/50 ≤\|Gear factor/Gear divider\|≤50
	Torque limit	Set by internal parameter
	Feedforward gain	0-100 %(Set by internal parameter)
	Position loop sampling frequency	2kHz
Speedcontrolmode	Order control method	8 -segment position can be controlled using DIN signal; Internal paramater of communication setting control
	Order smoothing method	Low-pass filte(r Set by internal parameter)
	Speed limit	Set by internal parameter
	Torque limit	Set by internal parameter
	Speed loop sampling frequency	8 KHz
Torquecontrolmode	Order control method	Internal paramater of communication setting control
	Order smoothing method	Low-pass filte(r Set by internal parameter)
	Speed limit	Set by internal parameter
	Current loop sampling frequency	16kHz
Digitalinput	Input specification	7 digital inputs,with COM terminal for PNP(high level valid 12.5-30V) or NPN(Low level valid 0-5 V)conncetion
	Input function	Define freely according to requirement, supporting following functions: Drive enable, drive fault reset, drive mode control, speed loopproportional control, positive limit, negative limit, homing signal, reverse command, internal speed section control, internal positive sectioncontrol, quick stop, start homing, active command, switch electronic gear ratio, switch gain, Position table function, clear pulse function
Digitaloutput	Output specification	5 Digital output,maximum voltage DC30V, differential output of OUT1 and OUT2 ,maximum output current 100 mA,single-ended output ofOUT3 -OUT5 ,maximum output current of 20 mA,and motor OUT2 brake output controlled by relay
	Output specification	Define freely according to requirement, supporting following functions: Drive ready, drive fault, position reached, motor zero speed, motor brake,motor speed reached, Z signal, maximum speed obtained in torque mode, motor lock, position limiting, reference found. Multstage position.
Encoder signal output function		Output 5V motor A,B,Z signal,Frequency division output range 0-65536;for multi axis synchronization, maximum output frequency 5MHz
Protection function		Over-voltage protection, under-voltage protection,motor over-heat protection(I²T),Short-circuit protection, drive over-heat protection, ect.
Standard		CE,IEC61800-5-1
RS232		RS232 (connection with PC :RS-232serial port to Mini_USB )
Profinet		Support message 1, message 3, message 111 , Technology Object, Non-cyclic data reads and writes, etc
Operationenvironment	peration temperature	0-40 ºC
	Storage temperature	10 ºC--70 ºC
	Humidity(non-condension)	5~95%
	Protection class	IP20
	Installation environment	Dust free, dry, lockable (like electrical cabinets)
	Installation mode	vertical installation
	Height	Rated working altitued at 1000 m or below,Above100m: Decreasing 1.5 % rated power. Maximum altitude 4000 m.
	Atmospheric pressure	86 kpa-106kpa
Note 1: =L: RS232,RS485,Pulse C: RS232 ,CAN,Pulse P: RS232 ,PROFINET,Pulse E: RS232 ,EtherCAT

Kinco Fd5 Series Servo AC Driving Equipment High Performance Support, Power Inverter 220V Fd425/435/625 AC Electric Motor Servo Drive

rvodrive p arameter ta

Products

Kinco Fd5 Series Servo AC Driving Equipment High Performance Support, Power Inverter 220V Fd425/435/625 AC Electric Motor Servo Drive

Basic Info

Product Description